- RODE Wireless PRO 2-Person Clip-On Wireless Microphone System/Recorder with Lavaliers (2.4 GHz)SKU: ROD-WIPROProduct Features Overview State-of-the-art Wireless Audio RØDE pioneered the ultra-compact wireless microphone category with the original Wireless GO and this legacy carries on with Wireless PRO. Utilising state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, it delivers crystal-clear, incredibly stable audio with a range of up to 260m. Wireless audio you can rely on in almost any recording application. Never Lose a Recording There’s nothing worse than pulling your audio into your editing software and realising your recording clipped and can’t be used. With the Wireless PRO, this is a thing of the past. 32-bit float on-board recording means your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too loud or too quiet. Never worry about setting your gain perfectly again. Gamechanger. Audio and Video, Perfectly in Sync With the Wireless PRO’s timecode capability, you can perfectly synchronise your audio and video with ease – no need for complex and expensive external timecode systems. Pristine Audio in Any Situation In addition to its 32-bit float on-board recording, the Wireless PRO offers a plethora of features that promise pristine audio in any situation. Ensure your audio is smooth and balanced with intelligent GainAssist technology. Precisely match your mic to your camera with flexible gain controls and tailored presets. Add an extra layer of protection with the safety channel. Perfect recordings, every time. The Ultimate Pro Recording Kit The Wireless PRO comes with everything you need to get set up and recording wireless audio right out of the box. Included are two professional Lavalier II microphones that are perfect for recording on-screen talent, as well as furry windshields for outdoor use, a pair of MagClip GO to attach your transmitters anywhere, a smart charging case and a handy accessory pack to store your lavs, cables and clips. Connect to All Your Devices Thanks to its analog (3.5mm) and digital (USB-C) outputs, the Wireless PRO is universally compatible with cameras and other audio devices, both iOS and Android smartphones and tablets, and Windows and Mac computers. Easy Configuration and Control Check your audio levels at a glance with the bright LCD display and configure settings on the fly with dedicated controls for everything from gain adjustment to triggering recordings. Customise the system to your needs anywhere using your computer or smartphone with the RØDE Central app. Complete control over your setup, so you can be ready for any recording situation. Monitor and Record Monitor your audio in the field with the Wireless PRO’s high-power headphone output, complete with on-board level control, or connect a headset or narrator microphone such as a lavalier to capture a third audio track. Ultimate versatility. Compact and Highly Portable The Wireless PRO features the same super compact, ultra-lightweight design that the Wireless GO series is renowned for. Discreet on talent and highly portable, this is the perfect addition to any recording setup. Road Ready The included smart charge case not only protects the Wireless PRO while you’re on the road, but ensures it’s always charged and ready to go. It also allows for ultra-fast data transfer, so you can quickly export recordings on the move. Locked and Loaded Locking 3.5mm lavalier connectors mean you never have to worry about your mics being pulled out mid-shoot. Perfectly paired with the included Lavalier II premium lavalier microphones. Wireless PRO User Guide The Wireless PRO User Guide explains everything you need to know about using your Wireless PRO and recording incredible audio for your content. This comprehensive guide covers everything from getting started and learning how to use your device through to configuring 32-bit float, timecode and advanced settings with the RØDE Central companion app.sale$519.00$569.00In Stock
- Rode VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power ConverterSKU: ROD-VXLRPROProduct Features Overview Description The RØDE VXLR Pro is a female TRS mini-jack to male XLR adaptor for connecting RØDE microphones with a 3.5mm output to devices with an XLR input. It utilises an internal transformer to convert an unbalanced signal to a balanced signal, making it ideal for connecting a microphone with an unbalanced output to mixer or interface. Premium componentry ensures extremely low noise when a long cable run is necessary. The VXLR Pro also converts 12-48V phantom power to 4V plug-in power, allowing microphones such as the VideoMicro and VideoMic GO to receive power from XLR devices and it features a locking connector that will ensure your connection is always secure when recording.$55.99In Stock
- Rode Wireless GO II 2-Person Compact Digital Wireless Microphone System/Recorder (2.4 GHz, Black)SKU: ROD-WIRELESSGO2Product Features Unmatched Versatility The Wireless GO II takes wireless versatility to new heights. Featuring a 3.5mm TRS analog output for plugging into cameras, plus a digital audio output via USB-C for plugging into smartphones, tablets and computers, it is perfect for content creation, filmmaking, on-camera or on-stage presentations, vlogging, YouTubing, livestreaming and more. On-board recording means you never have to worry about dropouts or audio issues again, while the flexible gain control lets you precisely tailor the output to your device. The Wireless GO II also offers the option to record each channel separately or combine the two, ensuring ultimate flexibility in post-production. Ultra-Compact Wireless Audio The Wireless GO II offers the same pocket-sized form factor as the original Wireless GO. The transmitters and receiver weigh less than 32g, taking up virtually no space in a camera kit bag, backpack, handbag or briefcase. It also comes supplied with a handy carry pouch to keep everything tidy and secure. The Wireless GO II's unique clip design makes it quick and easy to mount onto clothing or a camera cold shoe, mobile camera rig, boom pole, or any cold shoe accessory – ultra-compact wireless audio for any recording situation. Professional Sound. Seamless Connectivity The Wireless GO II has been designed to deliver professional-quality sound while being incredibly simple to use. The transmitters and receiver come auto paired, ensuring a seamless set-up process every time. RØDE’s Series IV 2.4GHz digital transmission with 128-bit encryption delivers a range of up to 200m (line of sight) and is optimised for extremely stable operation in areas with a high level of RF activity, including dense urban environments, shopping malls, universities, convention centres and offices. Each transmitter features a high-quality in-built omnidirectional condenser capsule for completely wireless recording, plus a 3.5mm TRS input for plugging in a lavalier microphone. The Wireless GO II is also supplied with twist-and-lock furry windshields for recording in windy or adverse weather conditions. Crystal-clear, professional sound in any situation. RØDE Central Unlock advanced features for the Wireless GO II with RØDE Central! This easy-to-use companion app lets you set up your device preferences, access, optimise and export recordings, activate and deactivate functions, and update your firmware. It’s free to download for Mac and Windows. More Features. More Flexibility Connecting your Wireless GO II to RØDE Central allows you to access a host of handy features, including a safety channel, which records a second track at -20dB in case your main audio clips, a mute lock so you never accidentally mute your transmitters, and a fine gain control which expands the three-stage pad to a 10-stage pad. On-Board Recording Each Wireless GO II transmitter has on-board recording capabilities, with enough internal memory to store over 24 hours of compressed audio and seven hours of uncompressed audio. When active, recording will begin as soon as the transmitters are connected to the receiver, so you will always have a backup of your recording in case you experience dropouts or other audio issues. When you load your files in RØDE Central, you’ll even be able to see exactly where any dropouts occurred, so you can pinpoint exactly what audio you need. Welcome to worry-free recording. Acoustic & Electrical Specifications Acoustic Principle : Pre-polarised pressure transducer Polar Pattern : Omnidirectional Frequency Range : 50Hz – 20kHz Maximum SPL (Mic) : 100 dB SPL (1kHz @ 1m) dBu Maximum Input Level (3.5mm) : -20dBV Microphone Preamp Gain : 20dB Equivalent Noise Level (A-Weighted) : 22dBA Power Requirements : In-built rechargeable lithiumion battery charged via USB 5V, 0.3A Operating Time : Up to 7 hours Analog Inputs : 3.5mm TRS (lavalier microphone input) Analog Outputs : 3.5mm TRS Transmission Range : 200m (line of sight) Computer Connectivity : USB Type-C OS Requirements : macOS 10.11 above, Windows 10 and abovesale$359.99$429.00In Stock★★★★★1 review(s)
- Rode SC11 Right-Angle 3.5mm TRS Y-Splitter Cable (10.9")SKU: ROD-SC11Product Features Overview The SC11 is a TRS splitter cable for connecting two mono outputs to a single stereo input. It is particularly suitable for connecting two microphones to a single DSLR-style camera, for example dual Wireless GO receivers, or a wireless receiver and a VideoMic. The SC11 is 275mm in length and is compatible with the cable management slots in the RØDE SM7-R and DCS-1 mounts. The output segment has in-built memory wire for neat cable positioning around your camera and the input segment is split into two – the black end records to the left channel, the red end records to the right. Compatible RODE Products: DCS-1 Wireless GO VideoMic NTG VideoMic Pro+ VideoMic GO VideoMicro$20.99In Stock
- Rode SC16 Straight USB Type-C to Right-Angle USB Type-C Cable (11.8")SKU: ROD-SC16Product Features Overview The 11.8" Rode SC16 is a short USB Type-C cable offering a high-quality connection between USB-Type-C-equipped Rode microphones and USB Type-C host devices. This highly flexible cable features a straight USB Type-C plug on one end and a right-angle USB Type-C plug on the other. Its integrated cable grip works handily with the cable management system on the Rode VideoMic NTG, making it an ideal solution for plugging your Rode VideoMic NTG into an Android mobile device.$20.99In Stock
- Rode Interview GO Handheld Mic Adapter for the Wireless GOSKU: ROD-INTERVIEWGOProduct Features Overview Interview GO Handheld Adaptor for Wireless GO The Interview GO is a handy adaptor that converts the Wireless GO transmitter into a compact handheld microphone for reporting to-camera or interviewing in the field. It features a sturdy attachment for the Wireless GO’s cold shoe clip to secure the mic in place, plus a high-density windshield for reducing plosives and protecting the capsule from wind when recording outdoors.$40.99In Stock★★★★★1 review(s)
- Rode RM5 Stand Mount for the NT5 MicrophoneSKU: ROD-RM5Product Features In the Box Overview Description The RM5 is a durable mic clip that is designed for mounting a variety of smaller RØDE microphones onto a stand. The RM5 effectively secures the microphone without interfering with its polarity or frequency response.$20.99In Stock
- RODE Wireless ME Compact Digital Wireless Microphone System (2.4 GHz, Black)SKU: ROD-WIMEProduct Features Harness the Freedom of Wireless The Wireless ME utilises RØDE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption to deliver incredibly stable wireless audio at a range of over 100m. Simply connect the receiver to your camera, smartphone or computer, attach the transmitter to you or your talent and hit record to capture pristine audio for your content – hands-free, no wires! Get Recording in Seconds With the Wireless ME, you can be recording pristine audio in seconds. The transmitter and receiver are automatically paired out of the box, and with in-built microphones, convenient clips for attaching to clothing or your camera, and all necessary cables included, you can start creating right away. Perfect Audio, Every Time The Wireless ME features broadcast-grade omnidirectional microphones for capturing high-quality sound for your videos. It also features our groundbreaking GainAssist technology to make capturing crystal-clear audio easier than ever before. This utilises intelligent algorithms in the Wireless ME’s audio processor that automatically control your audio levels to ensure they are perfectly balanced and to prevent your audio from clipping. Wireless You and Wireless ME The Wireless ME is the first wireless microphone to feature microphones built into both the transmitter and receiver, allowing you to capture audio from in front of and behind the camera – ideal for recording everything from two-way interviews to voice overs for video content. Pro Audio, Pocket-sized Its convenient in-built clip design allows it to be attached to clothing and mounted onto your camera with ease, no extra gear required. The ultimate grab-and-go microphone. Everything You Need to Start Recording The Wireless ME comes with everything you need to start recording right away. This includes four cables for connecting to phones, tablets, cameras, computers and more, as well as two furry windshields for recording outdoors and in windy conditions. It also comes with a handy pouch for safely storing your Wireless ME.sale$189.00$209.00In Stock
- RODE PodMic USB and XLR Dynamic Broadcast MicrophoneSKU: ROD-PODMICUSBProduct Features Overview The PodMic USB is an ultra-versatile dynamic microphone ideal for podcasting, streaming, gaming, voice overs, and other speech applications for content creation. It delivers rich, full-bodied sound and features both an XLR and USB output for connecting to an audio interface or mixer like a classic broadcast microphone, or directly to a computer for plug-and-play recording. The digital USB output features RØDE’s ultra-low-noise, high-gain Revolution Preamp™ and powerful APHEX® digital signal processing for capturing studio-quality sound with ease, and a zero-latency headphone output complete with level control, making recording seamless. For even more versatility, the PodMic USB is also fully compatible with iOS and Android mobile devices, offering a high-quality portable podcasting or streaming solution. Swiss Army Mic The PodMic USB is a super versatile dynamic microphone for capturing rich, broadcast-quality audio in any scenario you can throw at it. Thanks to its dual XLR and USB connectivity, it is just at home in a recording studio connected to an analog mixer as it is plugged straight into your computer, or you can even hook it up to your smartphone for a grab-and-go recording rig. PodMic USB is perfect if you want one flexible microphone that will make your content sound amazing in any context. Pro Sound When Creativity Calls Featuring a high-power neodymium capsule, the PodMic USB delivers warm, highly detailed audio with incredible clarity, making it exceptional in speech applications. It features an internal pop filter for minimizing plosives, an internal shockmount to reduce vibrations, and comes with a studio-quality external pop filter to make sure you can capture crisp, clean audio every time. All-in-one Recording Solution The PodMic USB features powerful on-board DSP (Digital Signal Processing) powered by APHEX® that makes it easy to capture professional sounding audio. Use VoxLab™ to quickly dial in the perfect sound, or dive deep into the granular controls for the high-pass filter, noise gate, compressor, and the legendary Aural Exciter™ and Big Bottom™. Monitor your audio with zero latency thanks to the headphone output, complete with on-board level control for controlling the volume of your audio. The perfect all-in-one recording solution. Take Your Studio On The Road Not only can you connect the PodMic USB to your favourite audio interface, mixer, laptop or computer, but it also connects seamlessly with iOS and Android smartphones and tablets. This means PodMic USB is the perfect tool for capturing broadcast-grade audio while you’re away from the studio, or just want a more compact setup – it’s a professional and portable recording rig for the road. Sleek Looks, Built to Last With its classic broadcast microphone aesthetic and sleek matte black finish, the PodMic USB exudes class, but it is also incredibly rugged and built to last. The PodMic USB is constructed from high-grade components housed in a super durable body, more than capable of surviving the rigours of everyday recording in the home, in the studio and on the road, and comes with an industry-leading five-year warranty.$279.00In Stock
- RODE DS2 Desktop Studio Arm for Broadcast MicrophonesSKU: ROD-DS2Product Features Overview DS2 The DS2 is a compact desktop studio arm that's ideal for perfectly positioning your microphone, camera, smartphone, light and other accessories on your desktop. With its heavy base stand, there’s no need for clamps or mounting points – simply sit it on your desk or other flat surface. It features two pivot points so you can quickly reposition your equipment, and its integrated cable guide slots will ensure your desktop remains tidy. Mount Up Whether you're a content creator, podcaster, streamer, gamer or even working from home, the DS2 desktop studio arm is the perfect solution for positioning your equipment exactly where you want it. It includes a 3/8” to 1/4” adaptor so you can mount a huge range of microphones, cameras, lights, and other equipment. Sturdy, Sleek and Stable The DS2 boasts a sleek and elegant aesthetic and its rugged design, weighted baseplate and precision-manufactured metal build ensure the ultimate in stability for your microphone, camera or other device (up to 900g). Flexible and Tidy Manoeuvring Featuring neat cable management guide slots and dual pivot points, the DS2 keeps your desktop tidy and free from cables without sacrificing mobility when it comes to quickly repositioning your equipment. It also operates silently, making sure your video calls, streams or content creation won’t be interrupted when you need to manoeuvre your equipment.$119.00In Stock
- Rode VideoMic Pro Plus On-Camera Shotgun MicrophoneSKU: ROD-VIDEOMICPROPLUSProduct Features * LB-1 is not included in extended warranty.$429.00In Stock
- Rode Video Mic Directional Microphone with Rycote Lyre SuspensionSKU: ROD-VIDEOMICProduct Features In The Box VideoMic Directional On-camera Microphone Overview Rode Video Mic Directional Microphone with Rycote Lyre Suspension Overview The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders. The integrated Rycote® Lyre® based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand. By employing a super-cardioid polar pattern the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport. The RØDE VideoMic directional on-camera microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty.$209.00In Stock
- Rode RODELink Performer Kit Digital Wireless Microphone SystemSKU: ROD-PERFORMERProduct Features Overview Rode RODELink Performer Kit Digital Wireless Microphone System Overview Featuring a high-quality, handheld condenser microphone (TX-M2) and a desktop receiver, the RØDELink Performer Kit is perfect for lectures, Q&As, school presentations, weddings and live performances. Providing one-touch pairing with the RØDELink receiver the microphone can be powered by the new and included RØDE LB-1 Lithium-Ion Battery or 2 x AA Batteries. The RØDELink range is so intuitive it works straight out the box, with no channel selection necessary. Using a secure Series II 2.4GHz encrypted digital transmission sent on two channels simultaneously, RØDELink automatically selects the strongest signal and ensures your audio is as reliable and secure as a cabled connection. The Performer Kit comes with TX-M2, RX-DESK, LB-1 Lithium-Ion Rechargeable Battery, microphone clip, microphone case and Micro USB Cable and includes a 2-year extended warranty.$559.00In Stock
- Rode invisiLav Discreet Lavalier Mounting System - 3 PackSKU: ROD-INVISILAV3Product Features Overview Rode invisiLav Discreet Lavalier Mounting System Overview The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.$25.99In Stock
- RODE Lavalier GO Microphone - BlackSKU: ROD-LAVALIERGOProduct Features Overview Lavalier GO is a professional-grade wearable microphone designed for use in a wide range of applications. The 3.5mm TRS connector is designed to pair perfectly with the RØDE Wireless GO and most recording devices with a 3.5mm TRS microphone input. Lavalier GO is designed to perform excellently in any broadcast application. Featuring a discreet 4.5mm omnidirectional microphone, it delivers crystal clear audio in all environments and is incredibly forgiving when it comes to placement on talent, allowing for greater flexibility in fast-paced situations. A foam pop shield is supplied to minimize wind noise and vocal plosives (hard ‘b’, ‘t’ and ‘p’ sounds), as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing Kevlar® reinforced cable, designed to withstand the rigours of any shoot. Lavalier GO also comes in white for easy concealment against bright clothing.$109.00In Stock
- Rode Vlogger Kit - VideoMic Me-L, Tripod 2, Smart Grip, LED Light & Accessories - for iOS DevicesSKU: ROD-VLOGVMMLProduct Features Overview Vlogger Kit | iOSFilmmaking Kit for iOS DevicesThe iOS Vlogger Kit is the perfect all-in-one solution for mobile filmmaking on your iPhone. Featuring a RØDE VideoMic Me-L, Tripod 2, SmartGrip, MicroLED and accessories, it contains everything you need to create unforgettable content. Take your vlogging to the next level.Key Features:Complete iPhone filmmaking kitDirectional sound pickup to reduce background noiseMicroLED light offers over four hours operation on a single chargeThree-position tripod for handheld or static useGimbal tripod head for accurate camera positioningAll-metal mount with rubberised grips for phones 65mm to 85mm wideThe iOS Vlogger Kit contains everything you need to get professional results when filming using your iPhone. The VideoMic Me-L microphone connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit. The Vlogger Kit comes with a mic clip to ensure the mic is secure and a furry windshield suitable for filming in outdoor and adverse weather conditions.The VideoMic Me-L is compatible with all Apple iOS devices with a Lightning port and running iOS 11 or higher.MicroLEDThe MicroLED is a compact rechargeable on-camera light that mounts neatly onto the Tripod 2. It features four adjustable brightness settings and a clip-on diffuser with eight coloured filters for capturing flawless shots. It’s charged and powered via USB-C, with over four hours operation on a single charge – more than enough for even the longest vlogs.Tripod 2The Tripod 2 is a sturdy three-position tripod for mounting cameras, microphones and other accessories. In the closed position, it’s perfect for handheld use. The tripod legs can also be opened out to a mid or wide setting for optimal positioning and stability on a tabletop, and it features a gimbal head for even more flexibility, ensuring you get the perfect shot every time.SmartGripThe SmartGrip is a high-quality smartphone mount – the perfect companion for the Tripod 2. Rubberised grips will keep your phone firmly in place and it can accommodate phones 65mm to 85mm wide, making it compatible with most models. It also features a cold shoe mount for microphones and accessories, and three attachment points for mounting in a range of orientations.Diffuser and Coloured FiltersThe MicroLED comes with a clip-on diffuser for reducing harsh shadows and softening the lighting in your vlogs. There are also eight coloured filters for capturing warm skin tones, cool outdoor scenes, and everything in between – flawless shots in any environment.sale$79.99$209.00In Stock
- Rode PSA1+, Premium Professional Studio ArmSKU: ROD-PSA1PLUSProduct Features Overview Professional Studio Arm The PSA1+ is the ultimate studio boom arm for podcasters, streamers and broadcasters. Its innovative parallelogram spring design ensures ultra-smooth movement and precise microphone placement in any position, while its fully damped internal springs and neoprene arm cover eliminate mechanical noise for completely silent operation. Integrated cable management ensures your setup is tidy and its extended reach and full 360-degree rotation make it easy to position your microphone exactly where it needs to be. Take your content to the next level. Sleek. Stable. Silent. Combining sleek looks with completely silent operation and peerless stability, the PSA1+ is the perfect mount for your microphone. Its innovative parallelogram spring design keeps the placement of your mic constant, even as the height is adjusted, and ensures movement is ultra-smooth. Rubber contact points provide superior isolation from knocks, bumps, and keyboard or mouse clicks while its fully damped springs keep noise to an absolute minimum. Just Add Your Mic Whether you're streaming, podcasting or broadcasting, the PSA1+ will slot seamlessly into your setup – just add your favourite mic and start recording. It is compatible with all standard shockmounts and both end and side-address microphones are accommodated by the flexible mounting system. Microphones weighing as little as 94g all the way to 1.2kg are supported with complete stability and the integrated cable management system can be used with both XLR and USB cables. Flexible by Nature The PSA1+ is designed to be as flexible as you need it to be. Perfectly balanced movement, extended reach and full 360-degree rotation allow you to position your microphone with absolute precision, so you always sound your best. High-quality locking nuts on the mounting system make it easy to adjust the angle of your mic and both a threaded desk mount and a padded desk clamp are included, making it a breeze to integrate into any home or professional studio.$179.00In Stock
- Rode VideoMicro Compact On-Camera Microphone-Open BoxSKU: ROD-VIDEOMICRO-OBProduct Features Overview Rode VideoMicro Compact On-Camera Microphone Overview The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RØDE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.saleOpen Box$60.29$79.99In Stock
- Rode Wireless GO II Single Set Compact Digital Wireless Microphone System/Recorder, 2.4 GHz - BlackSKU: ROD-WIRELESSGO2SINGLEProduct Features Unmatched Versatility The Wireless GO II takes wireless versatility to new heights. Featuring a 3.5mm TRS analog output for plugging into cameras, plus a digital audio output via USB-C for plugging into smartphones, tablets and computers, it is perfect for content creation, filmmaking, on-camera or on-stage presentations, vlogging, YouTubing, livestreaming and more. On-board recording means you never have to worry about dropouts or audio issues again, while the flexible gain control lets you precisely tailor the output to your device. The Wireless GO II also offers the option to record each channel separately or combine the two, ensuring ultimate flexibility in post-production. Ultra-Compact Wireless Audio The Wireless GO II offers the same pocket-sized form factor as the original Wireless GO. The transmitters and receiver weigh less than 32g, taking up virtually no space in a camera kit bag, backpack, handbag or briefcase. It also comes supplied with a handy carry pouch to keep everything tidy and secure. The Wireless GO II's unique clip design makes it quick and easy to mount onto clothing or a camera cold shoe, mobile camera rig, boom pole, or any cold shoe accessory – ultra-compact wireless audio for any recording situation. Professional Sound. Seamless Connectivity The Wireless GO II has been designed to deliver professional-quality sound while being incredibly simple to use. The transmitters and receiver come auto paired, ensuring a seamless set-up process every time. RØDE’s Series IV 2.4GHz digital transmission with 128-bit encryption delivers a range of up to 200m (line of sight) and is optimised for extremely stable operation in areas with a high level of RF activity, including dense urban environments, shopping malls, universities, convention centres and offices. Each transmitter features a high-quality in-built omnidirectional condenser capsule for completely wireless recording, plus a 3.5mm TRS input for plugging in a lavalier microphone. The Wireless GO II is also supplied with twist-and-lock furry windshields for recording in windy or adverse weather conditions. Crystal-clear, professional sound in any situation. RØDE Central Unlock advanced features for the Wireless GO II with RØDE Central! This easy-to-use companion app lets you set up your device preferences, access, optimise and export recordings, activate and deactivate functions, and update your firmware. It’s free to download for Mac and Windows. More Features. More Flexibility Connecting your Wireless GO II to RØDE Central allows you to access a host of handy features, including a safety channel, which records a second track at -20dB in case your main audio clips, a mute lock so you never accidentally mute your transmitters, and a fine gain control which expands the three-stage pad to a 10-stage pad. On-Board Recording Each Wireless GO II transmitter has on-board recording capabilities, with enough internal memory to store over 24 hours of compressed audio and seven hours of uncompressed audio. When active, recording will begin as soon as the transmitters are connected to the receiver, so you will always have a backup of your recording in case you experience dropouts or other audio issues. When you load your files in RØDE Central, you’ll even be able to see exactly where any dropouts occurred, so you can pinpoint exactly what audio you need. Welcome to worry-free recording. Acoustic & Electrical Specifications Acoustic Principle : Pre-polarised pressure transducer Polar Pattern : Omnidirectional Frequency Range : 50Hz – 20kHz Maximum SPL (Mic) : 100 dB SPL (1kHz @ 1m) dBu Maximum Input Level (3.5mm) : -20dBV Microphone Preamp Gain : 20dB Equivalent Noise Level (A-Weighted) : 22dBA Power Requirements : In-built rechargeable lithiumion battery charged via USB 5V, 0.3A Operating Time : Up to 7 hours Analog Inputs : 3.5mm TRS (lavalier microphone input) Analog Outputs : 3.5mm TRS Transmission Range : 200m (line of sight) Computer Connectivity : USB Type-C OS Requirements : macOS 10.11 above, Windows 10 and abovesale$259.99$279.00In Stock
- Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power ConverterSKU: ROD-VXLRPLUSProduct Features Overview VXLR+ The VXLR+ is a 3.5mm female TRS to male XLR adaptor, which will convert 12-48V phantom power down to 3-5V plug-in power, allowing RØDE on-camera microphones such as the VideoMicro and VideoMic GO, as well as self-worn microphones like the HS2, to receive power from an XLR input. It also features a locking connector for added security.$35.99In Stock
- Rode Colors 3 Set 3 For LavalierII and Wireless GoSKU: ROD-COLORS3Product Features Overview COLORS 3 Perfect for multi-mic set-ups, COLORS 3 is a handy accessory for Wireless GO II and Lavalier II customers consisting of four coloured sets to utilize and help with channel identification. It also adds a pop of colour that customers can use as a fun customisation tool.$25.99In Stock
- Rode AI-1 Studio-Quality USB Audio InterfaceSKU: ROD-AI1Product Features Overview AI-1 Single-channel Audio Interface The AI-1 is a professional-grade single-channel audio interface that delivers exceptional audio quality for everything from bedroom music recording to livestreaming and podcasting. Featuring a studio-grade preamp, a high-quality Neutrik™ combo jack for connecting microphones or instruments, and a high-power headphone amplifier for crystal-clear audio monitoring and playback, it’s the perfect interface for recording studio-quality audio at home. Key Features: Professional-grade single-channel audio interface Neutrik combo jack for connecting microphones, guitars, synthesisers and other instruments Studio-grade preamp with level indicator High-power headphone amplifier Studio-quality Sound With Ease With a single input and streamlined controls, the AI-1 is incredibly simple to use – just connect it to your computer, plug in your microphone or instrument, and hit record. Under the hood, the AI-1 packs plenty of punch, including an ultra-low-noise, high-gain studio-grade preamp for recording pristine audio, balanced ¼-inch outputs for connecting your favourite speakers, and a high-power headphone amplifier capable of driving professional high-impedance models for flawless monitoring. Get Connected and Create The AI-1 features a high-quality Neutrik combo jack for connecting both XLR and ¼-inch cables, so you can plug in your microphone, guitar, bass, or synthesiser with ease. Switchable phantom power ensures any microphone is accommodated, while the simple indicator LED allows you to monitor your input level for crystal-clear audio every time. Every AI-1 also comes with a free version of Ableton Lite, so you can get recording right away. Whether you’re livestreaming or making multi-layered music, the AI-1 will capture your sonic vision in every detail. RØDE Central RØDE Central is an easy-to-use companion app for the AI-1 (and other RØDE devices) that allows you to access device information and update to the latest firmware. The latest firmware version adds an extended gain range for enhanced performance with low-output dynamic microphones. To update, download RØDE Central below and follow the prompts.$179.00In Stock
- Rode NTH-Cable for NTH-100 Headphones (Black, 3.9')SKU: ROD-NTHCABLE12Product Features Overview Description The NTH-Cable is a high-quality flexible cable for use with the RØDE NTH-100 headphones. It features a locking connector to ensure it doesn’t decouple from the earcup attachment and the cable terminates in a pair of reinforced 3.5mm TRS jack plugs with integrated strain relief moulding for reliable long-term use. The NTH-Cable is available in five different colours (black, pink, green, blue and orange) and two different lengths (1.2m or 2.4m). Each cable comes with a set of coloured ID rings, which match the cable colours and can be placed on both connectors for easy cable identification. Also included is a 3.5mm to ¼-inch adaptor for use with professional audio equipment and a rubber seal for the earcup headphone jack that is not in use.Special Order$30.99
- Rode SC10 Right-Angle 3.5mm TRRS Cable (12.6")SKU: ROD-SC10Product Features Overview Description The SC10 is a high-quality 3.5mm TRRS to TRRS cable designed to connect the VideoMic NTG to DSLR-style cameras or mobile devices. Measuring 321mm long, the cable has two sections separated by a junction box for easy cable management. One end features an ultra-flexible cable segment for optimal shock mount performance, while the other end has a reinforced memory cable segment for routing around a camera.Special Order$35.99
- RODE SC19 Lightning to USB-C Cable (Black, 5')SKU: ROD-SC19Product Features Overview Description The SC19 is a high-quality Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices. Measuring 1.5 metres long, it is particularly suitable for connecting the VideoMic NTG to Apple mobile devices with a Lightning port at greater distances. Note: This cable will not charge or sync your iOS device.$40.99In Stock
- Rode WS-LAV Pop Filter for Lavalier Microphones (3 Filters)SKU: ROD-WSLAVProduct Features Overview Description The WS-LAV is a high-quality foam windshield that is designed to fit the Lavalier, Lavalier GO and RØDELink LAV microphones. It helps prevent wind noise and hard plosive sounds overloading the microphone capsule. The WS-LAV is supplied in a pack of three. Note the WS-LAV is not compatible with the Lavalier ME.$16.99In Stock
- RODE Premium XLR Cable, 3M / 9.8 Feet, BlackSKU: ROD-XLR3MProduct Features Overview XLR-CABLE The XLR-3 and XLR-6 are premium XLR cables ideal for use with a wide range of audio equipment. They feature a professional-grade Canare™ cable and high-quality Neutrik® connectors, ensuring incredibly clean signal transfer with extremely low noise. Available in two lengths – 3m (10ft) and 6m (20ft) – and a range of different colours, including orange, purple, green, blue, red, pink and black, these cables are perfect for use with RØDE products that feature colour-coded inputs, such as the RØDECaster Pro II, or any product with an XLR connection. Premium XLR cables for connecting microphones to audio equipment Professional-grade Canare™ cabling and Neutrik® connectors Extremely low noise for ultra-clean signal transfer Available in 3m (10ft) and 6m (20ft) lengths Available in orange, purple, green, blue, red, pink and black Manufactured to the highest tolerances, with rugged connectors and strain relief sleeves for unmatched durability$49.99
- RODE Premium XLR Cable, 3M / 9.8 Feet, GreenSKU: ROD-XLR3M-GProduct Features Overview XLR-CABLE The XLR-3 and XLR-6 are premium XLR cables ideal for use with a wide range of audio equipment. They feature a professional-grade Canare™ cable and high-quality Neutrik® connectors, ensuring incredibly clean signal transfer with extremely low noise. Available in two lengths – 3m (10ft) and 6m (20ft) – and a range of different colours, including orange, purple, green, blue, red, pink and black, these cables are perfect for use with RØDE products that feature colour-coded inputs, such as the RØDECaster Pro II, or any product with an XLR connection. Premium XLR cables for connecting microphones to audio equipment Professional-grade Canare™ cabling and Neutrik® connectors Extremely low noise for ultra-clean signal transfer Available in 3m (10ft) and 6m (20ft) lengths Available in orange, purple, green, blue, red, pink and black Manufactured to the highest tolerances, with rugged connectors and strain relief sleeves for unmatched durability$49.99
Rode
Showing 268 results for "Rode"
Showing 268 results
Price, $
- –$13$2.1k$13$545$1.1k$1.6k$2.1k
Brand
Availability
Deals & Stock
Product type
Features
Bag Type
Color
Material
Connection
Price, $
- –$13$2.1k$13$545$1.1k$1.6k$2.1k
Brand
Availability
Deals & Stock
Product type
Features
Bag Type
Color
Material
Connection
Explore Rode's top-quality audio gear, perfect for any project. Find everything from microphones and headphones to audio interfaces and cables. Whether you need studio microphones, broadcast solutions, or headset options, Rode delivers clear, crisp sound. Check out our selection of audio accessories, including cables, adapters, and microphone stands. Don’t forget our camera bags & cases, support rigs, and tripods to complete your setup. Rode’s equipment offers professional performance and reliability, making it ideal for creators and professionals alike. Get the best in audio with Rode and elevate your recording experience today.
Recently viewed
Most Popular Products
- RODE Wireless PRO 2-Person Clip-On Wireless Microphone System/Recorder with Lavaliers (2.4 GHz)SKU: ROD-WIPROsale$519.00$569.00In Stock
- Rode VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power ConverterSKU: ROD-VXLRPRO$55.99In Stock
- Rode Wireless GO II 2-Person Compact Digital Wireless Microphone System/Recorder (2.4 GHz, Black)SKU: ROD-WIRELESSGO2sale$359.99$429.00In Stock★★★★★1 review(s)
- Rode SC11 Right-Angle 3.5mm TRS Y-Splitter Cable (10.9")SKU: ROD-SC11$20.99In Stock
- Rode SC16 Straight USB Type-C to Right-Angle USB Type-C Cable (11.8")SKU: ROD-SC16$20.99In Stock
- Rode Interview GO Handheld Mic Adapter for the Wireless GOSKU: ROD-INTERVIEWGO$40.99In Stock★★★★★1 review(s)
- Rode RM5 Stand Mount for the NT5 MicrophoneSKU: ROD-RM5$20.99In Stock
- RODE Wireless ME Compact Digital Wireless Microphone System (2.4 GHz, Black)SKU: ROD-WIMEsale$189.00$209.00In Stock
- RODE PodMic USB and XLR Dynamic Broadcast MicrophoneSKU: ROD-PODMICUSB$279.00In Stock
- RODE DS2 Desktop Studio Arm for Broadcast MicrophonesSKU: ROD-DS2$119.00In Stock