
Teradek
344 products
Shop Teradek at Excellent Photo, your Montreal camera store shipping across Canada. This page brings together wireless video transmitters and receivers (Bolt and more), RT lens control, and the power and video cables that connect them on set.
- $264.99Backordered
Teradek XL Case for Bolt 6 XT TX, 4 RX and Antenna Array
Key specs
- Fits Bolt 6 XT TX, up to 4 Bolt RX, Antenna Array
- Material Polypropylene copolymer resin
- Construction Injection molded, mil-standard
- Protection Waterproof, dust tight, submersible
- Interior Custom foam
- Pressure valve Automatic equalization
$834.99BackorderedTeradek 0.8 MOD Motor Gear for MOTR.S (80 Teeth, 6mm Width)
Key specs
- Gear standard 0.8 MOD
- Width 6 mm (0.2")
- Compatible motor Teradek RT MOTR.S lens motor
- Compatible lenses Select cine-style/ENG lenses
- Construction CNC-machined
$54.99BackorderedTeradek 0.8 MOD Motor Gear for MOTR.S (50 Teeth, 6mm Width)
Key specs
- Gear standard 0.8 MOD
- Teeth 50
- Width 0.2" / 6 mm
- Compatible motor Teradek RT MOTR.S
- Compatible lenses Select cine-style/ENG lenses
- Construction CNC-machined
$54.99Backordered- $209.99Backordered
Teradek Protective SKB Case for Bolt 1000 LT Transmitter & Two Receivers
Key specs
- Case type Hard shell
- Fits 1 TX and 2 RX, Bolt 1000 LT
- Exterior dimensions 11.85 x 9.07" / 30.1 x 23.5 cm
- Material Ultrahigh-strength resin, foam
- Water and dust resistance Yes, gasket sealed
- Closure Latches
- Pressure vent Yes
- Carry handle Rubber overmolded cushion grip
$209.99BackorderedTeradek MOTR.S Gear Locking Screw Kit (Set of 5)
Key specs
- Compatibility Teradek RT MOTR.S Lens Motor / MOTR.S 0.8 MOD Lens Gear
- Thread size M3
- Screw length 4 mm
- Threading Fully threaded
$26.99BackorderedTeradek RT MK3.1 Slave Controller Cable (39")
Key specs
- Cable length 39.4" (100 cm)
- Connectors LEMO to LEMO, straight on both ends
- Connects Slave Controller to MK3.1 Receiver AUX port
- Compatible controllers RT Smartknob, Thumbwheel, Zoomrocker
$111.99BackorderedTeradek RT Controller Neck Strap
Key specs
- Designed for MK3.1 Controller Hand Unit
- Length Adjustable
- Carry style Around neck or cross-body
$4.99BackorderedTeradek RT Latitude MDR & MK3.1 Slave Cable (39", RA to RA)
Key specs
- Cable length 39.4" (100 cm)
- Connectors LEMO, right-angle on both ends
- Compatible receivers RT Latitude MDR, MK3.1
- Compatible controllers RT Smartknob, Thumbwheel, Zoomrocker
$111.99BackorderedTeradek RT Motor Gear (0.8-Mod Wide, 32-Pitch)
Key specs
- Gear standard 0.8 MOD / 32 Pitch
- Width 0.5" / 12 mm
- Fits RT MK3.1/3.0 Lens Motor
- Construction CNC-machined
- Lens type Select Cine-Style/ENG lenses
$69.99BackorderedTeradek Bracket for MOTR.S
Key specs
- Compatible with MOTR.S and MOTR.S MAX
- Rod standard 15 mm or 19 mm single rod
- Rod ports 1x 15 mm, 1x 19 mm
- Pan / tilt / roll No
- Colour Black
$179.99Backordered- $194.99Backordered
Teradek Smartknob - Power/Control 2-Pin Cable
Key specs
- Compatible cameras RED DSMC2
- Connector 2-pin Lemo
- Function Power and camera control
- Works with Teradek Smartknob
$194.99BackorderedTeradek RT Wired-Mode Controller Cable (6.6')
Key specs
- Cable length 6.6' (200 cm)
- Connectors LEMO to LEMO, 5-pin
- Connects RT Controller to RT Receiver
- Compatible with MDR.X, MDR.S, MK3.1, CTRL.1, CTRL.3
- Use Wired mode, where wireless is not supported
$139.99BackorderedTeradek Mounting Bracket for RT MDR.S
Key specs
- Compatible with Teradek RT MDR.S receiver
- Use Mounts receiver onto a camera rig
- Attaches to receiver 4 screws
- Extra mounting Slot for optional hardware
$109.99BackorderedTeradek USB Type-A to Micro-USB Type-B Cable (19")
Key specs
- Length 19" / 50 cm
- Connector 1 USB 2.0 Type-A Male
- Connector 2 USB 2.0 Micro Type-B
$4.99BackorderedTeradek Power/Control DTAP Cable for Smartknob Wired Lens Controller
Key specs
- Connects SmartKnob to CTRL port of RED DSMC2 cameras
- Functions Camera control and power
- Power connection D-tap
$194.99BackorderedTeradek MDR.X External Antenna Cap
Key specs
- Compatibility Teradek RT MDR.X Receiver
- Antenna type RP-SMA, 2.4 GHz Wi-Fi
- Connector RP-SMA
- Antenna length 1" / 25.4 mm
- Cable length 3" / 76.2 mm (RP-SMA)
$69.99BackorderedTeradek RT Latitude MDR & MK3.1 Slave Cable (24", RA to Straight)
Key specs
- Cable length 23.6" (60 cm)
- Connectors LEMO to LEMO, 1 right-angled, 1 straight
- Compatible receivers RT Latitude MDR, MK3.1
- Compatible controllers RT Smartknob, Thumbwheel, Zoomrocker
$111.99Backordered
Choosing Teradek wireless video gear
Start with the signal you need to carry. Teradek Bolt receivers are offered with different video inputs and outputs, so check whether your camera and monitors use SDI or HDMI. For example, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receiver (V-Mount) suits 3G-SDI and HDMI workflows, while the Teradek Bolt 6 XT MAX 12G-SDI/HDMI Wireless Receiver (V-Mount) is built for 12G-SDI. If you work at higher resolutions, the Teradek Bolt 6 XT 10K RX (V-Mount) is also listed here. Also think about how you will power the unit, since these receivers use a V-Mount.
Cables, antennas and power
Good cables keep a wireless setup reliable. Short runs such as the Teradek CineCoil 3G/HD/SD-SDI Cable (10") help keep the rig tidy, and the Teradek Straight 2-Pin to Right-Angle D-Tap Cable (15.7") handles power. For RED cameras, look at the Teradek RED Run/Stop Cable for MDR.X Receiver (16"). You will also find the Flexible 6GHz V Antenna kit, Teradek replacement batteries for Sony NPF970/770 and Canon BP945/970G batteries, and the Serv Micro.
Color bands and accessory plates
- Color bands for Bolt 6 LT and XT transmitters and receivers make it easy to tell units apart and match each pair on a busy set.
- Accessory plates and identification plates are available for Bolt 1000/3000 receivers and transmitters.
- Always check the model name in the product title before ordering.
Brand
Everything on this page is by Teradek. For other kinds of gear, browse the rest of our Teradek collection or ask our Montreal team.
Frequently asked questions
What is Teradek Bolt?
Bolt is Teradek's line of wireless video transmitters and receivers, used to send a camera's image to monitors on set.
Which Teradek Bolt 6 receiver should I choose?
Match the receiver to your video connections (SDI or HDMI) and your resolution needs, then check the product title for the exact model.
Does Teradek make lens control?
Yes, this page includes RT lens control items such as the RT Latitude MDR Motor Cable. Check your motor and receiver models before ordering.
Where can I buy Teradek in Canada?
Excellent Photo in Montreal sells Teradek products and ships across Canada.




















